How to make a napkin holder at home. Cute DIY napkin holder made of cardboard. What are the possible options for a napkin holder?

Good afternoon, my dear friends!

Today I am sharing with you my new experience, it will be a napkin holder made from disks. I'll tell you how you can make a napkin holder from CD/DVD discs. Disks themselves are rarely used these days. But I’m sure that many people have them lying around idle. I, too, like a hamster, did not throw them away, I kept hoping that they would be useful on the farm. And finally, I found a use for them. In one of the previous master classes, I decorated. in techniques – Decoupage and Paper art. Therefore, I decided to make a napkin holder in the same style, so to speak, a set.

Napkin holder made from CD/DVD discs

For work I needed:

CD/DVD discs – 3 pcs;
Napkins;
PVA glue;
Glue gun;
Acrylic paint, gold;
Acrylic paint, white;
Acrylic varnish;
Wine cork.

I want to say right away that this napkin holder was decorated in the same way as the bottles. Therefore, in this master class, I will not describe Decoupage and Paper Art in detail, just the general principle. You can see more details about the decor itself

And so, two disks will go on the walls of the napkin holder, one disk will be the base.

At the disk, I cut off one part. I applied a metal ruler and ran it with a utility knife several times. When the cut got deeper, the disc simply broke. I did the same with the second disk. These will be the sides of the napkin holder.

Cut off the edge

I cut off the edges of the third disk; this will be the base of the napkin holder.

Cut off two parts

In the middle of the disks, I glued small polyethylene circles with PVA glue. I did this so that the holes would not break through.

Cutting polyethylene circles

I diluted PVA glue with water and used the Decoupage technique, and glued napkins onto the discs.

I pasted a napkin

Now you need to let the napkin dry (to speed up the process, I constantly used a hairdryer).

Then I painted the middle, where the polyethylene is, with white acrylic paint. I painted it only on the outer sides, there will be a drawing here. When the paint had dried, I cut out two designs from a Decoupage napkin and glued them with acrylic varnish.

After the varnish had dried, everything (except for the drawings, of course) was covered with blue acrylic paint. For uniformity, I painted it a second time. Dried it. And I used gold paint all over the blue background.

I glued the pictures and painted them with blue paint.

All that remains is to apply napkin flagella (Pape art). This is probably the most painstaking part of the work. But, due to the flagella, the napkin holder will turn out elegant and openwork. I have done paper art only on the sides so far. I will decorate the bottom after I glue the sides.

Glued napkin flagella

The decoration of the napkin holder is finished, all that remains is to assemble it.

Using a utility knife, I cut the wine cork into four pieces.

Cut a wine cork

And covered them with gold paint.

Covered the corks with gold paint

I glued two corks to one side panel (on the inside) with a glue gun. They will serve as napkin stops.

Then, I applied glue to the other sides of the corks and glued the second side. To make it even, first I put a side panel with corks, tried it on, applied glue and attached the second side panel.

I glued two corks to the sides

Now, quickly and carefully, I applied hot glue to the lower edges of the side panels and glued them to the base.

Glued the sides to the base

All that remains is to make “legs” for the napkin holder. I glued the remaining two mugs to the bottom of the napkin holder using a glue gun. And the protruding parts of the base were decorated with napkin flagella.

That's it, the napkin holder made from discs is ready.

Well, now it comes complete with spice bottles.

Napkin holder made of discs complete with bottles

This is how you can make a napkin holder from disks with your own hands.

Friends, if you found my master class useful, share it with your friends!

A napkin stand, or napkin holder, is an indispensable attribute of a festive, and not only festive, table. Made from a variety of materials, these little things are designed to serve as a napkin holder and also please the eye.

Of course, you can buy a ready-made item, but a napkin holder made with your own hands looks much more interesting on the table.

A little history of napkins

Napkins appeared more than three hundred years ago; they were sewn from expensive fabrics, decorated with embroidery, and were used by noble, rich people. Over time, with the development of manufactories, napkins began to be used by different segments of the population. These beautifully designed items, most often embroidered, were used at celebrations, carefully stored and passed on from generation to generation.

Then the napkin, folded in a certain way, was threaded into a special ring and in this form was placed near the cutlery. Nowadays, also on special occasions, linen napkins threaded into a ring are used, which give the set table a solemn appearance.

Over time, disposable paper napkins appeared, which we all actively use. There are many different items used for this, and a beautiful napkin holder is one of them.

Plywood napkin holders

Nowadays, not many people are interested in sawing from plywood. In the middle of the twentieth century, when there were not only computers, but also televisions in apartments were a rarity, many people in their free time cut out a variety of things from plywood with a jigsaw, decorating their lives. Nowadays they cut out not only with a jigsaw, but also use laser cutting, and MDF napkin holders made by laser cutting can often be seen on tables lately.

A napkin holder made of plywood, drawings of which are not at all difficult to find, like other things, is made slowly, with love. The warmth of the hands and soul of the person who made such a craft brings joy to the house. It’s always nice to look at something made with your own hands, and if such a product decorates the table when serving it, then doubly so.

Previously, albums with cutting patterns were produced. A napkin holder made of plywood, drawings and drawings of which could be found in such a life-size album, took quite a long time to complete. First, the drawing was copied onto plywood, then parts were cut out along the contour. Sometimes the drawing changed along the way, but very rarely, special attention was paid to small details.

The finished item was assembled from several parts, sanded, varnished, stored in a visible place in the house, shown to guests, and often used.

Napkin holder made from newspapers

A DIY napkin holder can be made from a variety of materials, including tubes rolled from old newspapers. Now this hobby has spread quite quickly. From old newspapers, cut into pieces in a certain way and rolled into tight tubes, Christmas tree decorations are made, hats, baskets, coasters, even Easter eggs are woven from them. These tubes are very convenient, they do not break, they are easy to work with, they fit well and are attached to each other. You can weave either straight or spiral.

A DIY napkin holder made from newspaper tubes looks very original and is easy to make.

CD napkin holder

Now that recording discs is possible at home, a glitch during recording can make the disc unreadable. Craftsmen often give used, no longer needed discs a second life. They are used to make chandeliers, lamps, watch dials, boxes and much more.

A napkin holder made with your own hands from CDs will highlight the individuality of the performer and will be an original gift.

Anyone can make such a napkin holder, the main thing is desire. It can also be decorated in different ways. The photo above shows one option, but the discs can be painted, another picture can be pasted on, in general, there is a lot of room for imagination.

Napkin holders made of different materials

People make napkin holders with their own hands from cardboard, covering it with beautiful fabric.

There are craftsmen who create beautiful napkin holders from plastic detergent bottles.

And there are hobbyists who make napkin holders from napkins. There are even napkin holders made from clothespins, which are very original.

Such products can be of various shapes: round, square, rectangular, asymmetrical.

And amateurs are engaged in creativity not because there is no money to buy a ready-made thing, but because the soul asks to do something original, something that others do not have.

Conclusion

Ready-made napkin holders in a huge selection, from a variety of materials, both factory-made and hand-made, can be bought in stores.

But a napkin holder, made with your own hands and painted (if necessary), bears the imprint of the individuality of the person who made it, the warmth of his heart and soul.

And such a thing is always in demand and brings a lot of joy to both the one who made it and the one to whom it was given.

18.07.2017 1421

How to make a napkin holder with your own hands

If, while setting the table, you suddenly discover that you don’t have a napkin holder, don’t be upset. You can easily make it yourself from any available material. For example, from cardboard. It is always in the house, and it is convenient to work with it.

Thanks to this publication, you will learn how to make a variety of napkin holders with your own hands - I present as many as 10 step-by-step master classes with unique photographs and descriptions.

DIY napkin holders made of cardboard

Bright with openwork trim

Take a double-sided piece of cardboard with a beautiful, bright design. Cut out a rectangle measuring 10 x 3 cm and 2 semicircles.

Glue all the parts together using a heat gun (as shown in the photo).

Decorate the finished product with elements cut from white openwork braid.

This napkin holder is suitable for napkins folded in half.

Butterfly shaped

From colored double-sided cardboard, cut out 2 butterfly silhouettes and a strip measuring 2 x 18 cm. Bend it as shown in the photo.

Glue the strip onto one of the butterflies using a heat gun.

And then apply hot glue to the edge of the strip and secure the second butterfly.

The result is such a narrow napkin holder.

It is better to place napkins rolled into tubes in it.

Metal option

Take the cardboard cylinder that always remains from the paper towel roll.

Cut it into rings 1 cm wide. You should get 8 pieces.

Leave four blanks in their original shape, and form stars from the rest. Insert the stars into the rings and secure them with PVA glue. Cut a piece of corrugated cardboard measuring 5 x 3 cm.

Glue 2 rings on it on both sides.

First paint the craft black, and then apply a little gold paint to the surface. Now the cardboard elements appear to be metal.

White napkins look very beautiful in such a stand.

Cut 6 squares measuring 10 x 10 cm from double-sided cardboard with a bright print.

Glue them into tubes, wrapping them around a cardboard cylinder and securing the corners with superglue.

Then glue all the tubes together in a circle and cut off the lower corners. Cut a circle with a diameter of 8 cm from cardboard of the same shade.

Glue the tubes onto it so that the sharp corners are on top. Decorate the craft with a satin ribbon and miniature flowers.

In this stand there is a place for each napkin.

DIY napkin stand made from paper sticks

Prepare paper sticks. They are easy to roll from the pages of an old magazine, wrapping them around a thin, long object. You will also need a piece of thick cardboard measuring 4.5 x 12 cm.

Cover the rectangle with white paper on all sides. Bend two paper sticks in half.

Glue them to the sides of the white piece using PVA glue. Also cut two strips measuring 11 cm, 9 cm, 6 cm and 4 cm.

Glue them one at a time in descending order of length onto the previously formed side walls.

Do the same manipulations with the second batch of paper strips.

Now all that remains is to paint the craft blue. Use acrylic pearlescent paint for this.

After drying, the napkin holder is ready for use.

As you can see, it will not be difficult to make original napkin stands from the most popular material for needlework - cardboard.

How to make napkin holders from improvised materials

If you like unusual and original things, then you can make napkin holders from pasta, tree branches, multi-colored pencils and even from plastic bottles (transparent or colored). Now let's talk about everything in order.

For this napkin holder you need to take pasta, which is called “wheels”.

Place a plastic bag on a flat surface and glue the pasta on it in three rows of 7 pieces. Just apply a drop of PVA glue to the side and attach the wheels to each other.

Then form 2 side walls. To do this, glue the pasta vertically, decreasing it by 1 piece in each row.

Extend the lower part of the napkin holder a little by adding 3 wheels.

The napkin holder is ready!

If you are confused by the appearance of the pasta, then you can paint it in any shade using a special paint in a spray can.

DIY napkin holder made from a transparent shampoo bottle

Wash the empty bottle, then wipe it dry.

Cut off the bottom and make side cuts.

Cut out the curly edges, a window on one of the edges and fringe on the sides.

Decorate the front of the craft with a dot pattern. To do this, use acrylic paints in golden and blue shades.

Use this beautiful thing for its intended purpose.

Napkin stand made of wooden sticks

Using a garden pruner, cut sticks 6-7 cm long from a dry branch of any tree.

Cut out a rectangle from thick cardboard and glue 7 blanks onto it using a glue gun.

After this, glue 15 sticks in a vertical position on one side of the bottom.

Do the same on the other side.

Decorate the craft with linen rope (stripes and bows), as well as pieces of twigs.

The original napkin holder is ready.

It conveniently holds large format napkins.

From a colored plastic bottle

Take a yellow plastic bottle, wash it and wipe it dry.

Cut the bottom part so that you get 2 symmetrical cockerels with beaks and scallops.

Using a black marker, draw feathers, eyes, and beaks on the outside and inside of the craft. Cover the scallops with red plasticine or self-adhesive film.

Fold the napkins several times and place them in a napkin holder.

A white bottle makes graceful swans, an orange one is suitable for making cats, and a brown one can become material for a napkin holder with bears.

Collect pencils of different shades up to 8-9 cm long, but not less than 4-5 cm. Sharpen them well.

Cut out a rectangular blank from thick cardboard and cover it on all sides with beautiful bright paper.

Decide on alternating pencil colors.

Glue them in a vertical position using a heat gun. First on one side, then on the other.

Decorate one wall of the napkin holder with the shortest pencil.

All that remains is to put napkins and use them, enjoying the appearance

It is not always possible to choose accessories that fit perfectly into the finished interior of a kitchen, living room or bedroom. However, if you make them yourself, it will not only bring the joy of creativity, but will also allow you to create truly suitable and beautiful furnishings. One of such practical and pleasing things to look at can be a bright, beautiful napkin holder made of cardboard.

You will need:

Thick cardboard 2-3 mm thick

Colored paper for interior and exterior decoration (about 2 A4 sheets)

Thick PVA glue

Reliable glue for joining parts (Moment-Crystal or hot glue gun)

Mounting tape (aka kraft tape)

Sharp scissors

Utility knife (you can also use a roller knife)

Ruler, pencil, compass, glue brush

Self-healing cutting mat (if you don’t have one at hand, take care of the safety of the table surface in other ways)

Metal stationery clips or clothespins

The template of the proposed napkin holder is very simple, but easy to use, and will help us become familiar with some basic techniques of the cardboard technique, which allows us to create beautiful and practical boxes, organizers and boxes from ordinary cardboard.

From thick cardboard we cut out 4 semicircular blanks and 2 rectangular bottom parts.

You can change the size of the template to your liking and even vary the shape of the blanks.

Let's start connecting the parts. To do this we need a wide mounting tape. We glue the parts of the bottom and walls end-to-end, and the adhesive tape should fasten them both from the inside and from the outside.

Tip: you can decorate a napkin holder not only with colored paper, but also with bright cotton fabric. The algorithm of work in this case will remain exactly the same, however, before covering it with fabric, it would be advisable to cover the outer part of the napkin holder with a layer of plain white paper.

We trace the workpiece on colored paper, making allowances of at least 3 cm on all sides.

We bend colored paper and paste over the cardboard blank from the outside. For this we use PVA glue, trying to ensure that there are no bulges or folds on the paper.

Now 4 cuts should be made in the “cover”. To do this, use a pencil to extend the line of the inner fold of the napkin holder by allowances and make cuts along it, not reaching the end of the part 3-4 mm. We make small cuts diagonally to the edge of the napkin holder.

Glue the allowance to the inside of the napkin holder. After this, we trim the side parts of the “rim” in the same way. We place the napkin holder on its side, make a straight cut from the fold line, and stepping back 3-4 mm from the edge, finish with a triangular cut.

Now we make jagged cuts along the edges with scissors, without cutting about 4 cm to the edge of the cardboard part. Otherwise, sloppy gaps may form at the end.

Glue the cuts to the wrong side. To make the glue adhere better, you can press the folds for a while with clothespins or office clips.

While the main part is drying, we return to the remaining cardboard blanks. They need to fit inside the existing napkin holder, so they should be reduced slightly by cutting off about 2mm from the flat side of each of the semicircular pieces and from one of the edges of the rectangle. Don’t forget to check how the pieces fit by placing them inside the napkin holder.

For the inside of the napkin holder, it makes sense to choose paper of a different color. We glue the blanks onto the paper, making allowances of at least 1.5 cm on all sides. We cut the corners at 45 degrees and make zigzag cuts along the rounded edge of both parts, also not reaching the very edge of the template.

Glue the side parts of the bottom part, leaving the long parts free. We bend and glue all the allowances onto the side parts.

Now all that remains is to connect the outer and inner parts of the napkin holder. To do this, first glue the bottom part so that the remaining un-glued allowances are fixed to the side walls. After this, we glue the side parts using Moment-Crystal type glue.

When the glue has firmly set, our napkin holder is ready to take its place on the dining table and be a delight to the eye!

It is not always possible to choose accessories that fit perfectly into the finished interior of a kitchen, living room or bedroom. However, if you make them yourself, this will not only bring the joy of creativity, but will also allow you to create truly suitable and beautiful furnishings. One of such practical and pleasing things to look at can be a bright, beautiful napkin holder made of cardboard. In this article we will tell you how to make a napkin holder with your own hands.

Making a napkin holder: materials and tools

thick cardboard 2-3 mm thick
colored paper for interior and exterior decoration (about 2 A4 sheets)
thick PVA glue
reliable glue for joining parts (Moment-Crystal or hot glue gun)
mounting tape (aka kraft tape)
sharp scissors
utility knife (you can also use a roller knife)
ruler, pencil, compass, glue brush
self-healing mat for cutting (if you don’t have it at hand, take care of the safety of the table surface in other ways)
metal stationery clips or clothespins

How to create a napkin holder yourself