To create comfortable conditions for the room and to prevent the ingress of sunlight inside, it is recommended to do roller blinds with your own hands. Step-by-step instructions will help you choose the right material and components for this mechanism, as well as carry out the necessary calculations. This option is much more profitable and more economical than buying products in stores. In addition, creating an original and unique design with your own hands is always a pleasure.
It is quite possible to make such curtains yourself.
Importance of soaking
The material is impregnated with special antibacterial agents. The degree of transparency is different: transparent, translucent, darkening. Choice color solutions and drawings are as diverse as possible.
Attention! Pre-processed polyester is often used.
Impregnations:
- Antistatic impregnation prevents dust from sticking to the web.
- Spraying in various shades adds modernity to the look - metallic color, mother-of-pearl pigments add a soft shine.
- With the help of a Teflon coating, the fabric has special water and dirt repellent properties. Suitable for kitchens and balconies.
- Fire protection is suitable for any building.
Forming a protective layer of the canvas, impregnations are considered absolutely safe and harmless.
Calculations
Before you start sewing a product, you should calculate the amount of material. When installing fasteners in a window opening, measure it directly. If in a wooden frame, measure the parameters of the glass.
Marking the location of future curtains
Dimensions of prepared sewing cuts:
- web width - glass width (poem), for allowances + 20-40 mm;
- length - opening height + 50-150 mm.
Cloths with such parameters are needed in duplicate - for the front side and the wrong side. Their drawing may differ. Or it can be done in the same way. You need ribbons and decorative cords to create garters. The length of the strips of fabric is equal to 2 lengths of the fabric +250 mm additionally.
Preparation of materials
For sewing and fastening are used:
- timber for fastening, its parameters are 30x40 mm, can be replaced with a metal tube; the parameters of the fasteners correspond to the width of the curtains;
- it is allowed to use a ready-made purchased cassette system as a fastener element;
- a metal rod or a wooden bar is used as weighting agents;
- paper clips and a stapler for furniture;
- screwdriver with screws for installation works fasteners;
- sewing items.
The fabric must be carefully selected. Due to the use of impregnations, the fabric becomes elastic and easy to clean.
Fastening the canvas
Light-transmitting material:
- light scattering - partially transmits the sun's rays into the room;
- light reflection - impervious to rays, due to which the coolness in the room is maintained.
Whether it is plain material, or with photo prints, or with expressive ornaments, you should adhere to the basic rules when choosing:
- harmony of colors of textiles with pieces of furniture;
- in dining rooms and kitchens, it is not recommended to use dark monochromatic solutions; floral patterns and abstractions are suitable;
- the image of the canvas should not be made exactly as on the wallpaper;
Note! It is advised to use such color combinations: chocolate shade with gold, beige and cream, blue with silver, yellow and white, red - gold and beige.
- the translucency of the fabric visually expands the room;
- the transverse stripes of the wall are made wider;
- the arrangement of the picture in an upright position increases the height of the ceilings;
- the exit of windows to the south side is made cooler, for this they use blue, green and purple cold colors, the northern rooms will be warmer due to orange, red and yellow tones;
- blackout darkens the room thanks to a dense texture that does not let light through.
One way to finalize
Performance
Work is performed in the following order:
- The fabric is laid out and sewn from the wrong side. Calculations are taken into account. On both sides in length, on one side in width. The resulting pouch is turned inside out onto the face.
In this case, after sewing, a pocket is made, the canvas is ironed and a weighting agent is inserted.
- If a pocket is made as a weighting agent, it is necessary to sew up the gap. Alternatively, leave it open while inserting it into the inside of the bag.
After laying the weighting material inside the bag, a curtain is sewn over it over it. The indent is 5 mm. This will prevent it from curling up. After the gap is sewn up.
- The ironed curtain is wrapped around the bar and connected together with a stapler. If a pipe is used for fastening, it is wrapped and sewn. You can also sew the fabric by hand.
- Pre-prepared dressings are thrown over the upper mount and fixed with a stapler or by tacking the thread with neat stitches.
- The timber is attached to the opening or to the window frame at the bottom. The upper part is decorated with curly elements.
Attention! To be able to change the curtain, hooks or zippers are used instead of a stapler.
The use of rings in the roller blind system
For plastic windows, canvases are made and attached directly to the windows themselves. In this case, adhesive tape is used. A wooden lath is used as a weighting agent.
Thanks to self-sewn curtains in several variations, you can change the design of the building, depending on the mood and the seasons.
To create your own roller blinds, step-by-step instruction and videos provided.
Latching mechanism
To fix the product, you can create a so-called remote curtain mechanism. Fabric loops or plastic rings are sewn to the upper part. Then you attach the cord to the top of the window. Better to apply decorative. The cord goes down through the bottom and passes through the rings.
The left cord is passed through the ring on the right side and vice versa. The ends that remain free are used to open and close the canvas. If necessary, fixation is carried out in the desired state.
The length of the cord used is determined when the web is fully rolled. The excess is cut off and the ends are tied together.
Such a system does not require manual intervention when folding the curtains - just use the cord
With the help of screws, the mechanism is made in a similar way. The ring is screwed into the top of the opening or hooks. In this way, the position is changed without manually winding the curtain into a roll. This happens automatically. Place the cord or tape more than 100 mm from the outer edges of the web to prevent it from popping out.
Thus, a do-it-yourself roller blind is created. Step-by-step instructions with photos are attached to explain all the processes. Ready product intended not only for closing window openings, but also used for glass doors. Saves the room from sunlight and decorates the interior. Moreover, designers do not advise using blinds for home furnishings, which are considered an office option. Roller blinds are much more suitable for creating a cozy and homely atmosphere that is convenient to use.
DIY roller blinds: a simple master class
Roller blinds are distinguished by their neatness and austere style, which will make them an excellent addition to a kitchen in a modern or classic style. Window decoration with curtains is an important element in the interior design process of a room. This question is especially relevant in the arrangement of small spaces - such as a small kitchen. One of the best solutions for such areas are do-it-yourself roller blinds sewn and mounted on a frame. Their mechanism is not as complicated as it might seem at first glance, and it is quite possible to make it yourself. How to make roller blinds - a detailed master class will help you figure it out.
Advantages and advantages of roller blinds
The mechanism of roller blinds is a piece of cloth, which, opening the window opening, is rolled into a roll onto a roller hidden in a pocket.
Roller blinds allow you to easily adjust the lighting in the kitchen
This principle of operation has its advantages for decorating windows over traditional curtains in their classic form:
- they are suitable for any premises, from the living room to the kitchen;
- have simple and very convenient designs;
- with their help it is easy to regulate lighting;
- used as independent curtains, and in tandem with other curtains;
- they are hung on both wooden and plastic frames.
It is convenient to attach roller blinds directly to the window frame. So they will not interfere when the window is opened in ventilation mode.
The principle of operation of roller blinds
Making roller blinds with your own hands, relying on the proposed master class, will cost much less than choosing a ready-made mechanism in a store. Their cut is so simple that it is available even to those who do not have perfect sewing skills.
The principle of operation of roller blinds (diagram)
The principle of operation of roller blinds is as follows:
- The function of the cornice is performed by a rod-shaft, which is attached to the frame or above the window opening. The canvas is held on it.
- The fabric itself is fixed with garters made of cords or ribbons. They are attached to the top of the structure where the shaft mechanism is located.
- Garters allow you to open the curtains to any height.
- Depending on the shape of how to sew roller blinds, they can have several transverse "leaves" of different widths, adjustable by garters.
How to install roller blinds without drilling (video)
Measurements for roller blinds
To build a pattern for roller blinds, it is important to determine the dimensions that you want to mount on the window - whether they will cover only the glass or hide the window frame as well.
Roller blinds for the kitchen can be of different types, therefore, before taking measurements, you need to decide on the design
For this:
- the window is measured and all the obtained values are recorded in a notebook;
- the length of the product is calculated from the sum of the height of the window, plus 15 cm for the pockets and 2 for processing the sections;
- curtain width - those dimensions that will cover the glass in the frame plus 2 cm for processing sections.
The choice of fabric for curtains in the kitchen
When choosing a fabric, two features should be taken into account:
- curtains must provide high quality protection from light;
- they will be clearly visible in the window from the street.
Thicker fabric will significantly darken the sunny side
When choosing a fabric, do not forget about the drawing on the outside, because the roller blinds are perfectly visible from the street.
Therefore, the canvas should be dense and preferably double-sided. If the selected fabric does not meet these parameters, there is no need to be upset. You just need it twice as much as the calculations required by measurements to sew it in two layers with the wrong side to each other.
It will be better to choose a material that has an antistatic effect. This will prevent dust from settling on the curtains and will need to be cleaned less frequently.
How to choose roller blinds for the kitchen (video instruction)
Required materials and tools
To make original curtains, you can limit yourself to choosing a suitable fabric by hanging it on a ready-made mechanism from a hardware store or hardware store. But its structure can be assembled independently.
The described master class will require the most simple tools and available materials:
- 2 wooden slats in the length of the window opening;
- furniture stapler;
- sewing machine;
- metal corners;
- the cloth;
- thick satin or corsage ribbon;
- decorative buttons or buttons.
Master class on sewing and installation of roller blinds for the kitchen
To sew roller blinds with your own hands, you need an hour and a half of free time
A detailed master class will help you quickly understand the technology for manufacturing roller blinds.
You just need to follow the instructions:
- If the selected fabric is double-sided, the cut sections are tucked in, stitched with a basting seam, then stitched on a sewing machine.
- If the curtain is cut from two fabric cuts, the patterns are folded with the front side inward and connected with basting stitches from the bottom and on the sides, then stitched on a typewriter. The workpiece is turned inside out on the front side, the corners are carefully straightened, steamed with an iron and the upper part of the curtains is covered.
- In order for the curtain to be beautifully stretched, a weighting agent is attached to the bottom. To do this, the bottom edge is tucked up and sewn to the canvas to make a pocket. A rail or metal rod is inserted into it.
- The curtain cloth is attached to the base - a wooden beam. The fabric is placed on a flat surface, the upper edge of the future curtain is wrapped around the rail and pinned with a furniture stapler.
- Ready-made ribbons are used as garters or they are sewn with their own hands from a fabric of a suitable color. The length of the garters is determined by doubling the height of the window plus 15-20 cm per knot or buttons.
- The garters are attached to the base with a stapler. They will hold the roll of the rolled curtain.
- To fix roller blinds in a window opening or on a frame, use metal corners. They are first screwed to the wall or frame, then fixed by the upper part from both sides to the base of the roll structure.
That's the whole technology of sewing and installing the most elementary design of roller blinds. To do such, you need to spend only an hour and a half of free time with minimal material costs.
Roller blinds in the kitchen (photo)
Roller blinds have become very popular for decorating windows in various rooms, and when they come to the store, their eyes simply scatter from the abundance of goods of different colors and materials. How to sew roller blinds with your own hands? - here main question housewives who love to do needlework or those who have a limited budget. We answer - of course it is possible, and even necessary! And it doesn't take a lot of effort, just patience and the necessary materials.
There are a number of advantages, why many people choose roller blinds. First, it is practical and economical in terms of finance and floor space. Secondly, they are suitable for any room in any design style. Thirdly, thanks to the lifting mechanism, the light level of the room can be adjusted. Fourthly, it is very easy to take care of them, and you will have to do it extremely rarely, in contrast to the classic long curtains. Fifth, roller blinds on plastic windows are very easy to install using self-tapping screws or adhesive tape.
Which fabric to choose
The best fabric for any roller blinds, including roller blinds, is polyester. This material has a special impregnation that protects against water, dust and dirt. Polyester curtains do not have to be completely removed and washed with light dirt, it is enough to treat the stains with a damp cloth. Although polyester has such positive qualities, this does not mean that other fabrics are not suitable for roller blinds. You can use heavy cotton, linen, cambric and even burlap.
The color and pattern on the fabric should correspond to the main idea of the interior. Horizontal stripes widen the window opening, but can significantly lower ceilings. Bright flower patterns are better to be small, because a large, bumpy pattern can disadvantageously focus attention on a modest window. If the room is exposed to too much daylight during the daytime, you can hang roller blinds made of thick fabric in dark shades. White and beige fabrics make the room bright and cheerful, and let the sun's rays through well.
Required materials and tools
The materials that you may need when making Roman blinds with your own hands are very simple and uncomplicated.
- Piece of fabric
- Centimeter letnaya for measuring and cutting the canvas
- Sewing machine
- Two wooden blocks
- Screwdriver and self-tapping screws
- Furniture stapler
- Ribbons and laces for fastening
Step-by-step instructions for the manufacture of roller blinds
You will learn how to make roller blinds with your own hands from our article using a detailed description of the process. To begin with, we will discuss how to measure the height and width of the window as a rule before cutting the product. If a do-it-yourself curtain will be installed inside the window to the upper frame, then we measure the height and width of the opening. And if you decide that the canvas should be fixed on the wall above the window, then we measure it like this: from the upper edge of the window we retreat 10-15 cm upwards, and the cornice will be fixed there. Next, we measure the length of the planned curtains, it will be 10-15 cm below the windowsill, and the width will also protrude on the sides by 10 cm.
Before making measurements, you need to decide in which part of the window the roller shutter will hang - inside the opening or outside
With side cord
Homemade roller blinds with this type of rise are more convenient to use, but may take more time and effort to manufacture and install.
- Cut the fabric curtains according to the measurements of the window, you should have two identical blanks, do not forget to leave allowances for the seams.
- We make a pocket for the weighting rail at the bottom of the curtain and insert it. At the top, the product will be attached to a wooden block with Velcro.
- Next, we sew the plastic rings on the ribbons, stepping back from the upper edge about 5 cm, and from the sides 15 cm. We screw the hooks on the back of the setting bar.
- The curtains will be raised using two cords threaded into the rings. The length of the first is equal to three lengths of curtains, and the length of the second is the same plus half the length of the canvas.
- Tie the cords to the hooks and thread them around the curtain through the rings. Pay attention to the photo: the longer cord must go through two rings.
- The cords are fixed to the wall from the side of the longest cord. If it is necessary to raise the roller blind, you just need to pull on the threads and fix them at the desired level.
With garter strap
- The first step is the same as in curtains with a side cord: transfer the measurements taken to the fabric and cut out the parts, they are sewn in the same way as in the first case, leaving one side not sewn.
- Fold the fabric face to face and sew along the edge on three sides, leaving the top edge without a seam.
- Turn the product inside out and iron all seams with an iron. You have a so-called bag.
- We turn the bottom edge so that we get a pocket for the weighting agent. We sew and insert the weighting rail.
- The second wooden plank must be fixed on the frame or above the window, and then we attach tapes to this plank to fix the raised curtains.
- We attach the finished curtain to the improvised cornice using a furniture stapler.
Important! With this installation method, it will be problematic to remove the entire fabric for replacement or washing. Therefore, we suggest the best way- this is Velcro. Glue one part of it to the block, and sew the other along the edge of the curtain. So you can easily replace the annoying curtain with a new one.
As you can see, it is not very difficult to make such unusual fabric blinds yourself. Stock up on creative inspiration and patience and then everything will work out!
Below is a video on the manufacture of roller blinds with a factory lifting mechanism
Among the huge variety of curtains, blinds are of particular interest to the consumer. The reason for this choice is quite compelling, in our small-sized apartments it is quite difficult to place not only cascades of heavy curtains, but even the most necessary furniture. Therefore, the issue of saving space is more than acute.
Do-it-yourself blinds - photo
Blinds partially solve this problem, since they take up very little space due to their placement close to the glass unit. But the cost of this product is also considerable, and making blinds with your own hands is not difficult at all. In this case, you can choose the material that matches your preferences in color and texture.
Types of roller blinds
In order to start making roller blinds, you need to understand what these products are. In fact, this is a rectangular piece of canvas, located in the window opening or very close to it. The curtains are opened by raising the fabric to the required height, while the material is rolled into a roll (hence the name).
There are the following types of roller blinds, differing mainly in the type of construction of the lifting mechanism and the method of installation:
- The blinds can be installed either on the wall with the help of a curtain rod or on the frame itself. In this case, it does not matter whether it is wooden or plastic window in your apartment. It's just that in the first case, a block on self-tapping screws will be used to fix the curtain, in the second - double-sided adhesive tape. Also, blinds can be mounted separately on each window sash.
- Another difference lies in the location of the roll on which the fabric is rolled, the roll can be located both at the top of the curtain and at the bottom.
- In addition, roller blinds can be divided according to the functions they perform. For example, curtains made of dense, translucent fabric are used to completely darken a room. And the curtains made of openwork fabric will imitate stained glass or simply dim the light from the window.
An interesting option for additional room decoration are day-night blinds, in which dense fabric is combined with transparent material in two layers. Depending on the time of day, you can use one or another canvas.
Step by step creation of roller blinds
Regardless of the type of roller blinds, the manufacturing technology is, in principle, the same, first the canvas is prepared, then the lifting mechanism. Therefore, we offer instructions for the step-by-step creation of a roller blind.
Choosing the fabric for the curtains. The best option would, of course, be a special material with protective layers, which not only practically does not get dirty, but also has antistatic properties, is resistant to fading and deformation.
Depending on where the curtain will be fixed, we measure the dimensions of either the window opening, or the sash, or the window frame. We cut out curtain fabrics of the appropriate size from the fabric with an allowance of 2.5 cm at the edges and 15 cm in length. At the same time, there are two strips for each curtain, for the front and the wrong side. If the window is very wide and it is impossible to make a curtain from one piece of material, we cut out the fabric so that the seam falls on the window frame.
We sew the front and back sides, for this we fold the pieces "face to face" and sew from the inside out on three sides. Then we turn out the fabric, sew the rest of the curtain and carefully iron the seams.
Roller blinds with bottom roll
The easiest way to make blinds with a lower shaft:
Unfortunately, such curtains will have to be rolled up manually and fixed with tapes.
Curtains on the cornice
A more difficult option to manufacture, but more convenient to use. Such blinds can be opened to any height no longer manually, but using a counterweight system:
The curtains are raised by pulling the cord, which is fixed at the required degree of curtain opening, all on the same hook.
How to install a roller blind on a finished mechanism?
The most effective option, but requiring some investment of funds, is to install a curtain on a ready-made mechanism:
- To do this, you need to purchase a special set consisting of a lifting mechanism, a shaft and a fastener, which is subsequently adjusted to the size of the window.
- The bottom of the canvas is made out similarly to the previous options, one of the Velcro elements is sewn onto the upper edge. The second part of the adhesive tape is attached to the shaft using double-sided tape or glue.
- Brackets and a lifting mechanism are fixed on the wall over the window opening, the curtain is fixed on the shaft and rolled into a roll. The entire structure is installed in a regular place and the operation of the blinds is checked.
What can homemade roller blinds look like? Photo examples of ready-made options
As you can see, the manufacture of roller blinds is not particularly difficult and even an inexperienced person can do it. But the opportunity to create a worthy product of your unique design really deserves attention. Below are the options for roller blinds (photos and examples) that were made by hand:
Window decoration with curtains is an important element in the interior design process of a room. This question is especially relevant in the arrangement of small spaces - such as a small kitchen. One of the best solutions for such areas are do-it-yourself roller blinds sewn and mounted on a frame. Their mechanism is not as complicated as it might seem at first glance, and it is quite possible to make it yourself. How to make roller blinds - a detailed master class will help you figure it out.
The mechanism of roller blinds is a piece of cloth, which, opening the window opening, is rolled into a roll onto a roller hidden in a pocket.
This principle of operation has its advantages for decorating windows over traditional curtains in their classic form:
- they are suitable for any premises, from the living room to the kitchen;
- have simple and very convenient designs;
- with their help it is easy to regulate lighting;
- used as independent curtains, and in tandem with other curtains;
- they are hung on both wooden and plastic frames.
It is convenient to attach roller blinds directly to the window frame. So they will not interfere when the window is opened in ventilation mode.
The principle of operation of roller blinds
Making roller blinds with your own hands, relying on the proposed master class, will cost much less than choosing a ready-made mechanism in a store. Their cut is so simple that it is available even to those who do not have perfect sewing skills.
The principle of operation of roller blinds is as follows:
- The function of the cornice is performed by a rod-shaft, which is attached to the frame or above the window opening. The canvas is held on it.
- The fabric itself is fixed with garters made of cords or ribbons. They are attached to the top of the structure where the shaft mechanism is located.
- Garters allow you to open the curtains to any height.
- Depending on the shape of how to sew roller blinds, they can have several transverse "leaves" of different widths, adjustable by garters.
How to install roller blinds without drilling (video)
Measurements for roller blinds
To build a pattern for roller blinds, it is important to determine the dimensions that you want to mount on the window - whether they will cover only the glass or hide the window frame as well.
For this:
- the window is measured and all the obtained values are recorded in a notebook;
- the length of the product is calculated from the sum of the height of the window, plus 15 cm for the pockets and 2 for processing the sections;
- curtain width - those dimensions that will cover the glass in the frame plus 2 cm for processing sections.
The choice of fabric for curtains in the kitchen
When choosing a fabric, two features should be taken into account:
- curtains must provide high quality protection from light;
- they will be clearly visible in the window from the street.
Therefore, the canvas should be dense and preferably double-sided. If the selected fabric does not meet these parameters, there is no need to be upset. You just need it twice as much as the calculations required by measurements to sew it in two layers with the wrong side to each other.
It will be better to choose a material that has an antistatic effect. This will prevent dust from settling on the curtains and will need to be cleaned less frequently.
How to choose roller blinds for the kitchen (video instruction)
Required materials and tools
To make original curtains, you can limit yourself to choosing a suitable fabric by hanging it on a ready-made mechanism from a hardware store or hardware store. But its structure can be assembled independently.
The described master class will require the presence of the simplest tools and materials available:
- 2 wooden slats in the length of the window opening;
- furniture stapler;
- sewing machine;
- metal corners;
- the cloth;
- thick satin or corsage ribbon;
- decorative buttons or buttons.
Master class on sewing and installation of roller blinds for the kitchen
A detailed master class will help you quickly understand the technology for manufacturing roller blinds.
You just need to follow the instructions:
- If the selected fabric is double-sided, the cut sections are tucked in, stitched with a basting seam, then stitched on a sewing machine.
- If the curtain is cut from two fabric cuts, the patterns are folded with the front side inward and connected with basting stitches from the bottom and on the sides, then stitched on a typewriter. The workpiece is turned inside out on the front side, the corners are carefully straightened, steamed with an iron and the upper part of the curtains is covered.
- In order for the curtain to be beautifully stretched, a weighting agent is attached to the bottom. To do this, the bottom edge is tucked up and sewn to the canvas to make a pocket. A rail or metal rod is inserted into it.
- The curtain cloth is attached to the base - a wooden beam. The fabric is placed on a flat surface, the upper edge of the future curtain is wrapped around the rail and pinned with a furniture stapler.
- Ready-made ribbons are used as garters or they are sewn with their own hands from a fabric of a suitable color. The length of the garters is determined by doubling the height of the window plus 15-20 cm per knot or buttons.
- The garters are attached to the base with a stapler. They will hold the roll of the rolled curtain.
- To fix roller blinds in a window opening or on a frame, use metal corners. They are first screwed to the wall or frame, then fixed by the upper part from both sides to the base of the roll structure.
That's the whole technology of sewing and installing the most elementary design of roller blinds. To do such, you need to spend only an hour and a half of free time with minimal material costs.
Roller blinds in the kitchen (photo)
